Hardware facial rejuvenation

Our skin needs regular care. The collagen fibers included in its composition tend to stretch over the years. Modern cosmetic procedures help to deal with emerging problems non-surgically, by using the latest medical technologies.

The most modern way to restore the skin is hardware rejuvenation. With its help, you can easily get rid of age spots and wrinkles, increase the elasticity of the skin and maintain its elasticity. It should be remembered that age-related changes in the body begin after the age of 30. Therefore, it is at this age that you should visit a beautician and get the necessary advice on how to further preserve the beauty of your skin. In the event that age-related changes have already occurred, a specialist will help you quickly cope with them, preventing the development of the aging process.

Scientific developments and research, confirmed by practical results in the field of aesthetic medicine, are now widely introduced into daily practice. The surgical method remains a radical measure to correct appearance. Hardware rejuvenation methods provide an excellent effect, according to cosmetologists and research results.

Due to its unique efficiency and quick results, the hardware rejuvenation method has gained wide popularity among clients and specialists of beauty salons.

With hardware rejuvenation, the effect is achieved by exposing the skin to devices that restore the cellular structure. The hardware rejuvenation procedure combines the use of light and radio current. This technique is recognized in cosmetology as the most effective and safe. Also, it does not cause any side effects. And rejuvenation occurs due to the production of natural elastin and collagen.

Skin imperceptibly for you is difficult to rejuvenate from the inside, its tone is restored and elasticity increases. Hardware resurfacing is used to remove age-related wrinkles and crow's feet around the eyes. The effect of rejuvenation does not occur immediately, but the result can be seen after the first procedure. And to achieve the best result, you will need 5-6 sessions with an interval of three weeks.

Hardware rejuvenation methods.

myostimulation

The myostimulation method is used in modern cosmetology to smooth wrinkles, improve the structure and color of the skin, facial contour and figure correction. Myostimulation also helps eliminate puffiness and signs of fatigue from the skin around the eyes, tighten the eyelids, strengthen facial muscles, relieve muscle tension, reduce the appearance of cellulite, and improve the condition of the endocrine and highly strung.

E-Light facial rejuvenation

Hardware facial rejuvenation using E-Light technology is very popular today. This technology consists of a complex effect on the skin of high-frequency current and light energy. This method allows you to deeply and gently affect the skin, without violating its integrity. The visible effect can be noticed already after the first procedure: your skin becomes elastic and radiant.

thermalage

Absolutely safe facial rejuvenation method without side effects. Thermage is a radiolifting (RF-lifting), which affects the deep layers of subcutaneous fat with high-frequency energy. This procedure rejuvenates the skin from the inside, improves the synthesis of collagen in it, makes it young and healthy.

face lift

The facelift is a series of techniques aimed at rejuvenation of varying intensity, which allow improving the appearance of the skin, tightening it, eliminating certain types of wrinkles, correcting the facial contour and nasolabial folds, in addition to solving many appearance problems associated with age-specific changes. . The lifting procedure is very effective and has practically no contraindications.

Photorejuvenation

Photorejuvenation is a fast and effective procedure that favors the rejuvenation of facial skin. With this method, the superficial layer of keratinized cells is removed using photographic flashes. Penetrating deep into the dermal layer of the skin, high-frequency pulsed light improves collagen production, as a result of which age spots become pale, facial redness decreases, and the skin becomes smooth, healthy and elastic. .

Lymphatic drainage

Lymphatic drainage allows the body to get rid of fluid that accumulates in the intercellular space and leads to congestion with age. The accumulation of toxins in the tissues, the slowing down of the lymphatic flow lead to the appearance of bags under the eyes and puffiness of the face, deterioration of the complexion, increased blood pressure, the development of varicose veins, overweight and cellulite.

laser resurfacing

Laser resurfacing is a very promising and dynamically developing procedure for facial and body rejuvenation. Depending on the method of exposure and the type of laser, this method allows you to solve many problems associated with age-related changes, as well as congenital or acquired problems and cosmetic defects in appearance. Laser resurfacing is a range of safe and modern procedures.

Despite the fact that face hardware methods are safe and painless, only a specialist can correctly assess the situation and choose the right procedure.

Hardware cosmetology: types of procedures.

Conventionally, all cosmetic hardware procedures are divided into several types, depending on the equipment used and the way of impact on the body:

• Phonophoresis, peeling and facial massage are performed on ultrasound machines.
• Devices using current perform galvanic lymphatic drainage, electrolysis, darsonvalization, myostimulation and microcurrent therapy.
• Brossage, pressotherapy, diamond peeling, cryotherapy, infrared sauna are performed with mechanical and thermal devices.
• The light device for cosmetic procedures is designed for photolifting, photoepilation, photorejuvenation of the face.

Peeling

Home peeling cosmetic facial cleansing is distinguished by a deeper effect on dead skin particles, opening pores and removing a large accumulation of sebaceous secretions. Hardware stripping can be of several types:

• Chemical cleansing - when a special wax is applied to the skin of the face, forming a mask. It is necessary to use the mixture for about 48 hours, after which the mask is removed along with the upper layer of the epithelium. The rehabilitation course is 30 days.
• Ultrasonic cleaning is a painless cosmetic procedure that is performed with an ultrasound machine. The entire session lasts about 45 minutes, no rehabilitation is required.
• Deep cleansing of the skin with a gas-liquid device that releases a jet of oxygen with saline solution. This peeling lasts 25 to 35 minutes.

Uz-cleansing of the face is a very effective procedure for smoothing the skin. Find out more about her.

Hair removal

In modern beauty salons and professional aesthetic clinics, hardware hair removal is divided into several types:

• Laser cosmetology. This method is used when it is necessary to remove dark hair on light skin, to smooth the armpit or bikini area. After 6-9 sessions, hair growth noticeably stops, but you should know that the laser is powerless against blonde hair.
• Cosmetic photoepilation - hardware physiotherapy is performed using a device with krypton lamps. A clinic session will take 1-2 hours. Of the disadvantages of hair removal - the ability to get a thermal burn of the skin, dryness, peeling.
• elos cosmetic hair removal - works on the principle of combining the advantages of hardware photo and laser hair removal. It is considered the safest cosmetic procedure, suitable for any type of skin and hair of all shades.

liposuction

Non-surgical hardware liposuction or ultrasonic cavitation is a new method to eliminate accumulations of adipose tissue in hard-to-reach places, eliminate orange peel skin, lift buttocks and correct body imperfections. The procedure is carried out with the device on paired parts of the body, the area of which has a volume of at least 10 centimeters: hips, buttocks, arms, upper back, thighs.

Lymphatic drainage

Hardware lymphatic drainage is a method of hardware physiotherapy, the purpose of which is to remove excess fluid and products of intercellular metabolism from the body. Already after the first session, there is an active effect on the entire lymphatic system of the body, due to which the muscles relax, blood circulation improves, and toxic substances are removed from the body.

Hardware lymphatic drainage with the help of the device can be of several types:

• Electrophonophoresis - involves the introduction under the skin with the help of electrodes of stimulating, regenerating and nourishing agents.
• Vacuum lipomassage is based on the local effect of negative pressure on areas of the epidermis. It is often recommended in cosmetology with a microcurrent complex.

Lifting

Hardware lifting is a cosmetic procedure to tighten the skin, remove fine and deep wrinkles and rejuvenate the epidermis. Often the procedure is performed on the upper parts of the body: chin, cheekbones, neck, décolleté, eyes, and nasolabial folds. In the price lists of most beauty clinics, clients indicate the following types of professional lifting:

• Radio wave correction of the facial oval: the technique sets in motion compensatory mechanisms and resumes the production of natural neocollagen. After 2-3 months, the effect of the procedure will be null.
• Microcurrent therapy - the device activates the processes of tissue regeneration, affects the elasticity of the muscles, the functioning of the lymphatic system. The effect of the procedure will last up to 8 months.
• The SMAS lifting is a cosmetic procedure performed using a device that provides a focused emission of ultrasonic waves. The result appears within six months.

hardware massage

Hardware massage helps women to prolong youth, improve their health and relax spiritually. Depending on the area being worked on and the types of equipment used, cosmetic massage is divided into several subspecies:

• The vibromassage device is necessary to correct the shape of the breast, neckline area, correct posture. The session takes place in a chair and lasts a maximum of 30 minutes.
• Hydromassage is based on the use of the mechanical force of a water jet. Helps treat orange peel skin, breaks down fat deposits on the thighs, buttocks, abdomen. Many experts call this technique an alternative to liposuction.
• Cosmetic massage lpg - in modern medicine has found application in the treatment of varicose veins, radiculitis, myositis. For cosmetic purposes, lpg massage is used in the physiotherapy of local fat deposits, cellulite, skin laxity.

Removal of scars and scars.

Removal of inflammation, elimination of post-acne syndrome, removal of scars, scars, warts and papillomas is another direction in cosmetology. For this, the following procedures have been developed:

• Dermabrasion - polishes the surface of the skin or its deep layers. The purpose of this procedure is to smooth wrinkles, remove age spots and scars. Depending on the purpose, resurfacing can be done mechanically, chemically, or with a laser.
• Cryomassage - this device for cosmetology destroys tissues under the influence of liquid nitrogen. Helps to remove papillomas, warts, warts.
• Cosmetic cryotherapy is a cold treatment method. It is used in the treatment of severe acne, skin diseases.

Hardware cosmetology for the body.

Hardware cosmetology for the body will help to eliminate most skin problems, restore muscle tone, the main advantage of which is that the problems are solved without surgical intervention in a short time. Other indications to undergo a treatment with physiotherapy devices may be:

• fight against excess weight, cellulite;
• treatment of acne on the body;
• removal of tattoos, warts, papillomas;
• figure correction;
• hair removal;
• elimination of vascular stagnation of any localization.

At the same time, not a single hardware cosmetology clinic will undertake to perform the listed procedures for:

• oncological diseases;
• during periods of exacerbation of chronic diseases;
• the patient has implants;
• diabetes mellitus, venous varicose veins;
• poor blood clotting;
• poor patient health.

Hardware cosmetology for the face.

The hardware procedures for the face are intended to resolve the following issues:

• swelling;
• scars, skin defects;
• light and deep wrinkles;
• dryness, sagging;
• dull complexion;
• acne, post-acne;
• removal of unwanted facial hair.

Contraindications to the provision of cosmetic services on devices are:

• sensitive skin;
• the beginning of menstruation;
• take certain drugs;
• damage to the upper layers of the epidermis;
• increased sensitivity to pain;
• circulatory failure.

Hardware cosmetology at home.

Some devices, originally designed for professional procedures, are now available for home use. Home hardware cosmetology allows the use of:

• Steam sauna for the face - opens, cleanses the pores, helps to eliminate dryness, normalizes blood circulation.
• Laser Comb - Accelerates hair growth, eliminates dry scalp condition, treats weak and brittle hair.
• Ultrasonic Scrubber - Exfoliates dead skin particles, used for peeling anywhere on the body.
• Device for vacuum pore cleaning: removes black spots on the face, improves complexion and narrows pores.

What is hardware cosmetology?

The possibilities of modern medicine, combined with technical development, work wonders in terms of rejuvenation. Hardware cosmetology for the face is based on the process of using cosmetics, which, through the use of special equipment, can penetrate into the deeper layers of the skin for a better effect.

Using this method makes it possible:

• favorably affect skin inflammation, eliminating it;
• promote the regeneration processes of skin cells;
• improve lymphatic drainage processes;
• tone muscle and nerve activity;
• improve the general condition of the skin in problem areas.

Hardware cosmetology is an excellent alternative for women who do not want to go under a scalpel. Its use is especially effective at the first signs of age.

Types of hardware procedures.

The possibilities of hardware cosmetology for facial rejuvenation are very wide. To start this type of procedure, you need to visit a beautician so that she determines the problem and the type of necessary actions.

Types of hardware cosmetology procedures for the face:

• procedural courses using phototherapy;
• microcurrent-based exposure;
• ultrasound peels;
• they rejuvenation.

Procedures based on phototherapy help to get rid of acne, tighten the skin of the face and help in the fight against age spots.

Devices, which are intended for the use of microcurrents, allow you to train the muscles and nerves of the face, and also allow painless removal of wrinkles in the mouth area. Especially procedures with the use of microcurrents are indicated for people with enlarged pores on the face (black dots speak of their presence), since apparatus therapy contributes to their narrowing.

The use of ultrasonic peels is suitable for any type of skin, it helps to remove the layer of dead cells from the surface of the face and to eliminate fine wrinkles.

As a result, the skin looks fresher.

The Elos rejuvenation procedure is based on the simultaneous application of light pulses and high-frequency current discharges. Some patients with high sensitivity may experience pain from the effect of the current. But the result obtained will allow a person to forget about the discomfort experienced.

rejuvenate at home

For those people who do not have the opportunity to visit beauty salons regularly, due to lack of funds or remoteness of the residence, there are alternative options for using home cosmetology devices. When used regularly, they allow you to achieve the desired results. Also, ease of use does not require any special skills on the part of a person.

Having visited a beauty salon once and having found out what effect is needed, you can immediately purchase a device for home use. They are divided into:

• vacuum facial cleansing devices;
• universal devices for ozone, light, ion exposure;
• devices based on the impact of electric current;
• devices for laser exposure to the skin of the face;
• radiofrequency therapy.

Any of the above procedures will not require any medical knowledge or skills on the part of the user. It is enough to buy the device and follow all the instructions for its use.

Most of the time, if it is only used by one person, then there is no question about its working. Well, in cases where the facial simulator is used by two or more people, hygiene must be observed, that is, after each use, the device must be cleaned with an alcohol or vodka composition. To prevent bacteria from one body from moving to another.

New to hardware cosmetology

Beauty salons that are engaged in facial rejuvenation offer a novelty - the use of a number of German preparations in the BDR apparatus. A specially designed series allows you to get the desired result in a relatively short time. It also allows you to work with the client on an individual schedule, gradually eliminating all the problems in the most difficult areas.

The BDR hardware cosmetology procedure consists of several stages:

• facial skin cleansing;
• superficial peeling;
• hardware impact;
• additional treatment of wrinkles in problem areas;
• facial massage procedure;
• skin treatment with a special serum to preserve the result.

Such a complex effect allows the skin to renew itself in shorter periods of time.

Are there any contraindications for facial rejuvenation?

Many are interested in the question of whether there are contraindications to hardware cosmetology for facial rejuvenation. Of course there are and you have to take them into account before going to the procedure.

These include the following:

• the patient has cancer;
• if the woman is pregnant or breastfeeding;
• the presence of individual intolerance to at least one of the constituent components of the procedure;
• if a person suffers from poor blood clotting (especially in the presence of existing hereditary factors).

Regarding facial skin rejuvenation procedures based on exposure to microcurrents, a few more points should be added to the above list:

• the presence of epilepsy;
• recent heart attack or stroke;
• in cases of use of electrical pacemakers.

In order to avoid mistakes at the initial appointment in a beauty salon, a specialist should definitely ask the patient about the presence of diseases.

hardware rejuvenation

At this time, hardware cosmetology for facial rejuvenation is gaining more and more popularity. A variety of procedures allows you to choose the most suitable technique in a particular case. Such an alternative to surgical intervention makes it possible to non-invasively influence the aging process of the skin.

1. The most common salon service for wrinkle removal is ultrasonic lifting. The uniqueness of this technique lies in the fact that the device does not act on the epidermis, but on the muscles, which results in an excellent result. This method is suitable for those who have sagging corners of the mouth, chin, and neck, and the contour of the face has lost its former shape. A good effect can be obtained after the first procedure, so many women often resort to ultrasonic rejuvenation. The advantage of this technique is also the absence of pain.
2. Facial rejuvenation methods are complemented by laser procedures. The fractional method is based on the penetration of a beam that breaks into a grid into the deep layers of the epidermis. This stimulates the production of collagen cells, as a result of which the process of skin renewal begins: its structure improves, areas of hyperpigmentation disappear. Another type of laser exposure is facial rejuvenation. It affects only the upper layers of the skin. However, at the same time, all keratinized layers are removed, which interferes with the full supply of oxygen. In this case, the metabolism improves, blood flow increases, and the aging process slows down.
3. Hardware facial rejuvenation is also represented by the well-known photorejuvenation procedure. Thanks to a special device, light pulses are applied to sufficiently deep layers of the epidermis. At the same time, the method of facial rejuvenation itself is absolutely painless and has no discomfort, but the results will exceed all expectations. Wrinkles will smooth out, age spots, which often occur as a result of aging, will disappear. Thanks to photorejuvenation, it is possible to eliminate the severity of the capillary network, which often spoils the appearance.
4. Modern methods of skin rejuvenation are supplemented by Thermage - a procedure based on exposure to radio waves. At the same time, even in the deep layers of the epidermis, there is a rise in temperature that starts the process of collagen production. This technique is very effective, leaves no traces of exposure on the face and does not cause an allergic reaction.
5. The Elos rejuvenation procedure is also gaining popularity. It consists of the simultaneous application of high frequency current and light radiation. Thus, a complex effect is exerted on the skin. During the procedure, only a slight tingling sensation can be felt and nothing more. At the same time, the production of collagen fibers is stimulated, blood flow increases and cells are renewed.

What other salon methods exist?

How to rejuvenate the skin of the face is interesting to most women, but it is not always possible to achieve the expected effect. For women in their 40s and 50s, injectable facelift methods are perfect. The most common method is mesotherapy, a procedure for facial skin rejuvenation, based on the introduction of injections into the epidermis containing substances that smooth wrinkles. The composition is selected individually, depending on the condition of the skin. Most often, vitamins, hyaluronic acid, or fibroblasts are used for injections.

It is important to understand that different anti-aging facial procedures are used in each case. To eliminate the reason why the skin begins to fade, cosmetologists often recommend ozone therapy, which allows oxygen to be transported to the cells. At the same time, the metabolism speeds up, most wrinkles are smoothed, and the complexion improves. Ozone therapy is currently one of the most requested treatments as it is safe and gives good results.